Verilink WANsuite 5230 (34-00304.F) Product Manual Manuel d'utilisateur télécharger pdf (Page 38)

3-8 WANsuite 5260/5230

RAS

Sets the Remote Alarm Seconds (RAS) threshold. An RAS is generated by

the terminal equipment when an improper signal is received from the facility

(or upon receipt of unframed all ones). The default is 0 seconds (Disabled).

Reset Timer

Sets the Reset Timer threshold. This field is the contiguous number of

seconds that an alarm parameter must be clear before the alarm is reset.

Applicable values range from 000 through 900. A value of “000” means the

alarm will never be reset.

The Network screens provide the user-activated buttons described below.

CAUTION: Performance data will be lost upon power cycle or after performing a

Maintenance Reset/Restart.

Figure 3.5

Performance/Summary Screen

Button Function

Submit Sets any values that have been changed.

Clear Alarms Resets the alarm conditions and counts to zero.

Performance Displays a Performance/Summary screen that shows a current

count of the number of error events that have occurred over the

past 24 hours and the past 30 days.

Channels Displays the Channel Table Details Screen on page 3-21,

showing each channel by index number. Each channel’s rate

and service (by number) are displayed and can be changed

through user input.

Network 1 (or

Network 2)

Services

Displays the Services screen for the Network 1 or Network 2

interface.

Refresh Refreshes data on the current page.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 232 233

Pas de commentaire

Verilink WANsuite 5230 (34-00304.F) Product Manual Manuel d'utilisateur Page 38