Verilink WANsuite 7105 (34-00316.C) Product Manual Manuel d'utilisateur télécharger pdf (Page 114)

3-82 WANsuite 7105

Figure 3.76

Static UDP Translation Table Screen

Global Port

Decimal IP Port exposed to the global Internet. Default is 0.

Server Port

Decimal IP Port of the local UDP Server. This port is usually the same as the

Global Port. Default is 0.

Server Address

IP Address of the local UDP Server. Default is 0.0.0.0.

The Static UDP Translation Table screen provides the following user-

activated buttons:

You can configure or change the above-listed parameters on the Static UDP

Translation Details screen (Figure 3.77), which is accessed by selecting the

appropriate numbered link under the “Index” column on the Static UDP

Translation Table screen.

Figure 3.77

NAT Static UDP Translation Details Screen

NAT Port Table Screen

The parameters on the NAT Ports screen (Figure 3.78) define the NAT

global/Internet and local/Corporate ports. These parameters are configured in

the NAT Ports Details screen shown in Figure 3.79. Access the NAT Port

Details screen by clicking on the Index number of the desired port on the

NAT Port Table screen.

Button Function

NAT Details Returns the user to the previous screen.

Add New Lets the user add an additional address.

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 254 255

Pas de commentaire

Verilink WANsuite 7105 (34-00316.C) Product Manual Manuel d'utilisateur Page 114