Verilink Red Zone Encryption (REMS) (880-502423-001) Produc Manuel d'utilisateur télécharger pdf (Page 85)

Multiple shelf rack-mount systems

Red Zone Encryption Management System (REMS) User Manual

9-3

Figure 9-2 System Mounting Dimensions

Each dual-line shelf and heat baffle also occupies one vertical mounting

space.

Using heat baffles

Heat baffles are mounted the same as dual-line shelves as shown in

Figur e9-2, System Mounting Dimensions. Use the same mounting

instructions described for the dual-line shelf, above.

For a rack consisting entirely of dual-line shelves, one heat baffle must be

placed between every two shelves, as shown in Figur e9-2, System

Mounting Dimensions.

If any equipment is to be mounted above two consecutively mounted

dual-line shelves, place a heat baffle between the equipment and the dual-

line shelf.

Instructions for

mounting a dual-

line shelf or heat

baffle

The dual-line has mounting ears attached to the middle of the shelf for

mid-mounting in a 19-inch (482.6 mm) rack. (See Figur e2-3, Example

Dual-line Shelf System.) The ears are detachable for front-mounting the

module.

To mount the dual-line shelf to the equipment rack:

1. Place the dual-line shelf in an upright horizontal position.

2. Hold the shelf from underneath and align the mounting screw holes

on the 19-inch (482.6 mm) mounting brackets.

1.75"

HEAT BAFFLE

DUAL-LINE SHELF

1 Mounting

Space

HEAT BAFFLE

1.75"

Access System 2000

DLS 2100

(if required)

Slot 1

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 96 97

Pas de commentaire

Verilink Red Zone Encryption (REMS) (880-502423-001) Produc Manuel d'utilisateur Page 85