Verilink 1060A Broadcast Card (CG) Configuration/Installati Manuel d'utilisateur télécharger pdf (Page 2)

1060A Broadcast Card Rear Panel

Alarm / Power

1818

TERM

UNTERM

T1 IN

48 VDC

180 mA

EXPAND

Rear Panel Description

Expand:

These two 8-pin modular jacks are used for jumping the A or B inputs together to provide additional inputs.

T1 IN:

These two 8-pin modular jacks are used for the T1 input signal as well as the output of each input. These 2 connectors output AIS

with no input.

Terminate/Unterminate:

These two slide switches are used for setting the A or B input. They are recessed and can be moved with a

screwdriver. Terminate is used when the expansion connector is not used. Unterminate is used when the expansion connector is daisy

chained.

T1 Broadcast Port:

This 50-pin female connector is used for the expanded outputs of either the A or B inputs. Refer to the pinout table

below.

Alarm:

This 6-pin connector is used as follows for the alarm connection. The alarm connection is made on pins 2 and 5 to operate in a

normally closed mode (NC - opens on alarm) or on pins 2 and 6 to operate in a normally open mode (NO - closes on alarm). The contacts

are rated at 1.0 Amp AC or 1.0 Amp DC. 18- to 20-gauge wire is recommended.

Power:

This 6-pin connector is used as follows for the power connection. The unit requires a -48 VDC power source that is capable of

supplying 50 mA current. Connect a chassis ground lead to pin 4. Connect the -48 VDC lead to pin 3. Connect the return lead to pin 1. 18-

to 20-gauge wire is recommended.

1 2 3 4 5

Tip Ring Function

1 26 Output # 1

2 27 Output # 2

3 28 Output # 3

4 29 Output # 4

5 30 Output # 5

6 31 Output # 6

7 32 Output # 7

8 33 Output # 8

9 34 Output # 9

10 35 Output # 10

11 36 Output # 11

12 37 Output # 12

13 38 Output # 13

26 50

251

Alarm /

Power Pinout

Pin Function

148 VDCReturn

2 Alarm Common

3 -48 VDC

4 Frame Ground

5 Normally Closed

6 Normally Open

Expand / T1 In Pinout

Pin EXPAND T1 IN

1 Data Out Data In

2 Data Out Data In

3 Not Used Not Used

4 Not Used Data Out

5 Not Used Data Out

6 Not Used Not Used

7 Chassis Gnd Chassis Gnd

8 Chassis Gnd Chassis Gnd

14 39 Output # 14

15 40 Not Used

16 41 Not Used

17 42 Not Used

18 43 Not Used

19 44 Not Used

20 45 Not Used

21 46 Not Used

22 47 Not Used

23 48 Not Used

24 49 Not Used

25 50 Frame Gnd

Tip Ring Function

T1 Broadcast Port Pinout

127 Jetplex Circle

Madison, Alabama 35758

Sales and Marketing

800-926-0085

205-772-3770

info@txport.com

Technical Support

800-285-2755

205-772-3770

support@txport.com

Returns/RMA

800-926-0085, ext. 2227

TRANSPORT

1 2

1060A Broadcast Card 1
TRANSPORT 2

Commentaires sur ces manuels

Pas de commentaire

Verilink 1060A Broadcast Card (CG) Configuration/Installati Manuel d'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel informatique Verilink 1060A Broadcast Card (CG) Configuration/Installati